MPQ2166AGRHE-AEC1-P

MPQ2166A is an internally compensated, dual, PWM, synchronous, step-down regulator. It operates from a 2.7V to 6V input and generates an output voltage as low as 0.6V. The MPQ2166A can be configured as a 2A/2A or 3A/1A output current regulator and is ideal for powering portable equipment that runs on a single-cell Lithium-ion (Li+) battery due to its low 65µA quiescent current. The device integrates dual, 55mohm, high-side switches and 20mohm synchronous rectifiers for high efficiency without an external schottky diode. The MPQ2166A has peak current mode control and internal compensation and is capable of low-dropout configurations. Both channels can operate at 100% duty cycle. The MPQ2166A requires a minimal number of readily available, standard external components, and is available in a QFN-18 (2.5mmx3.5mm) package. Typical applications include automotive Infotainment, automotive clusters, automotive telematics, battery-powered devices and portable instruments.

• Configurable frequency up to 3MHz
• External sync clock Up to 3MHz
• 180° phase-shift operation, power good (PG) indicators
• External soft start (SS) and track mode
• Selectable advanced asynchronous mode (AAM) or forced continuous conduction mode (FCCM)
• Peak efficiency <gt/>90%, adjustable 0.6V to 5.5V output
• 100% duty cycle operation, 65µA quiescent current
• Short-circuit protection (SCP) with hiccup mode and valley current detection
• AEC-Q100 qualified
• Full protection features include cycle-by-cycle current limiting and thermal shutdown

Notas

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.