Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando solo caracteres válidos.
Es probable que el producto no se corresponda exactamente con su búsqueda
Ha comprado este producto anteriormente.
Ver en el histórico de pedidos
MAX3318ECUP+
Transceptor, RS232, 2 Controladores, 2 Receptores, 460 kbps, Suministro 2.25 V a 3 V, TSSOP-20
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Referencia del fabricante:
- MAX3318ECUP+
- Código Farnell:
- 2798980
- Hoja de datos técnicos:
- MAX3318ECUP+ Datasheet
Resumen del producto
The MAX3318ECUP+ from Maxim Integrated Products is a ±15KV ESD protected, 460Kbps RS232 compatible transceiver with AutoShutdown Plus in 20 pin TSSOP package. The IC's transmitter is an inverting level translator converts CMOS logic levels to RS232 compatible voltage levels. It has a 460Kbps data rate with worst case loads of 3Kohm in parallel with 1000pF, providing compatibility with PC to PC communication software (such as LapLink™). Receiver convert ±3.7V to ±13.2V RS232 signal levels into CMOS logic output levels. The transceiver has a low-dropout transmitter output stage enabling RS232 compatible operation from a +2.25V to +3V supply with a dual charge pump and charge pump requires only four 0.1µF capacitors. Devices automatically enter a low-power shutdown mode when the RS232 cable is disconnected or transmitters of connected peripherals are inactive for more than 30sec. They turn on again when they sense a valid transition at any transmitter or receiver input.
- Supply voltage range is 2.25V to 3V
- Operating temperature range from 0°C to 70°C
- Minimum transition-region slew rate is 4V/µs
- Transmitter skew rate is 100ns and receiver skew rate is 50ns
- Output voltage swing is ±4V
- RS232 compatible down to 2.25V
- Operating supply current is 300µA
- Low power shutdown with receivers active is 1µA
- AutoShutdown Plus saves power without changes to existing BIOS or operating system
- ±15KV IEC 1000-4-2 air gap discharge method, ±8KV IEC 1000-4-2 contact discharge method, ±15KV HBM
Aplicaciones
Comunicaciones y Red, Dispositivos Portátiles, Electrónica de Consumo
Advertencias
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Información del producto
¿Quiere ver productos similares? Simplemente seleccione los atributos requeridos y presione el botón ×
- :
- Transceptor RS232
- :
- RS232
- :
- 2Controladores
- :
- 2Receivers
- :
- 2.25V
- :
- 3V
- :
- TSSOP
- :
- 20Pines
- :
- 0°C
- :
- 70°C
- :
- -
- :
- -
- :
- MSL 1 - Ilimitado
Documentos técnicos (2)
Descarga en CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Disponible para pedidos pendientes
Más stock disponible en el plazo de entrega del fabricante, que es aproximadamente 13/06/22
×
33
Ahora puede reservar el stock simplemente pida la cantidad deseada y procese su pedido como de costumbre. La cantidad que no sea posible despachar ahora mismo quedará pendiente y se la enviaremos tan pronto recibamos el pedido del fabricante. Solo le cobraremos cuando despachemos los productos.
6,35 €
El precio no está disponible. Contacte con el servicio de atención al cliente.
- Precio para:
- Cada
Múltiplo: 1 Mínimo: 1
El precio no está disponible. Contacte con el servicio de atención al cliente.
Precio total:
Precio total: ( )
Precio total: --
Herramienta de filtros