¿Necesita más?
Cantidad | Precio (sin IVA) |
---|---|
100+ | 0,867 € |
250+ | 0,810 € |
500+ | 0,779 € |
1000+ | 0,754 € |
2500+ | 0,739 € |
Información del producto
Resumen del producto
TLE94103EP is an AEC-Q100 qualified protected triple half-bridge driver designed especially for automotive motion control applications such as side mirror x-y adjustment. It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with the direct interface or SPI interface. The half-bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (CW), reverse (CCW), brake, and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuits, open load, power supply failure, and over temperature detection. In combination with its low quiescent current, this device is attractive among others for automotive applications. The potential application includes HVAC flap DC motors, monostable and bistable relays, and side mirror x-y adjustment.
- Three half bridge power outputs
- Very low power consumption in sleep mode
- All outputs with overload and short circuit protection
- Independently diagnosable outputs (overcurrent, open load)
- Open load diagnostics in ON-state for all high-side and low-side
- Fast diagnosis with the global error flag, over temperature pre-warning and protection
- Over- and under voltage lockout, cross-current protection
- Operating voltage range from 5.5 to 20V
- PG-TSDSO-14 package
- Junction temperature range from -40 to 150°C
Especificaciones técnicas
Driver de motor de medio puente
3Outputs
40V
14Pins
20V
150°C
-
No SVHC (21-Jan-2025)
PG-TSDSO
DC con escobillas
2A
PG-TSDSO
5.5V
-40°C
AEC-Q100
MSL 2A - 4 semanas
AEC-Q100
Documentos técnicos (1)
Legislación y medioambiente
País donde se realizó la mayor parte del proceso de producciónPaís de origen:Malaysia
País donde se realizó la mayor parte del proceso de producción
RoHS
RoHS
Certificado de conformidad del producto