SER1360-103KLD
Inductor de Potencia (SMD), 10 µH, 7.2 A, Apantallado, 6.2 A, SER1360 Series
Avisarme cuando esté de nuevo en stock
| Cantidad | Precio (sin IVA) |
|---|---|
| 1+ | 2,810 € |
| 10+ | 2,100 € |
| 50+ | 1,940 € |
| 100+ | 1,910 € |
| 200+ | 1,870 € |
Información del producto
Resumen del producto
The SER1360-103KLD is a surface mount shielded Power Inductor with ferrite core. This inductor features tin-silver over tin over nickel over phosphor bronze (pins 1 and 2), matte tin over nickel over phosphor bronze (pin 3) terminations and is resistance to soldering heat maximum three 40 seconds reflows at +260°C, parts cooled to room temperature between cycles. This inductor also features moisture sensitivity level (MSL) of 1, failures in time (FIT)/mean time between failures (MTBF) is 38 per billion hours/26,315,789 hours, calculated per Telcordia SR-332 and only pure water or alcohol recommended for wash. DC current at which the inductance drops the specified amount from its value without current and inductance measured at 100kHz, 0.1Vrms, 0Adc on an Agilent/HP 4284A or equivalent.
- Up to 43A high current carrying capability
- Very low DC resistance
Especificaciones técnicas
10µH
Apantallado
12.7mm x 12.6mm x 5.45mm
-
± 10%
12.6mm
No SVHC (21-Jan-2025)
7.2A
6.2A
SER1360 Series
0.01081ohm
12.7mm
5.45mm
Documentos técnicos (1)
Alternativas para SER1360-103KLD
Se ha encontrado 1 producto
Legislación y medioambiente
País donde se realizó la mayor parte del proceso de producciónPaís de origen:China
País donde se realizó la mayor parte del proceso de producción
RoHS
RoHS
Certificado de conformidad del producto