¿Necesita más?
Cantidad | Precio (sin IVA) |
---|---|
1+ | 9,870 € |
10+ | 7,660 € |
Información del producto
Resumen del producto
MAX3238CAI+ is a true RS-232 transceiver that achieves a 1µA supply current with AutoShutdown Plus™ feature. When the device does not sense a valid signal transition on either the receiver or transmitter inputs within 30sec, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are inactive. The system turns on again when a valid transition is applied to any RS-232 receiver or transmitter input, saving power without changes to the existing BIOS or operating system. The 5-driver/3-receiver complete serial port is a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface intended for notebook or subnotebook computer applications. Applications include high-speed modems, battery-powered equipment, hand-held equipment, peripherals, printers.
- Guaranteed data rate: 250kbps
- Receivers active in AutoShutdown Plus mode
- Meets EIA/TIA-232 specifications down to 3.0V
- Flow-through pinout
- Supply current (shutdown) is 1µA typ at active-low FORCEOFF=GND, TA=+25°C
- Output voltage swing is ±5.4V typ (all transmitter outputs loaded with 3kohm to ground)
- Receiver propagation delay is 0.15µs typ at R-IN to R-OUT, CL=150pF
- Transition-region slew rate is 6V/µs min at CL=150pF to 1000pF, VCC=3.3V, TA=+25°C
- 28 SSOP package
- Temperature range from 0°C to +70°C
Notas
Los productos de ADI están solo autorizados (y vendidos) para usarse por el cliente y no se pueden revender o traspasar de cualquier otra manera a una tercera parte
Especificaciones técnicas
Transceptor RS232
5
250Kbps
5.5V
28Pins
-
0°C
-
MSL 1 - Ilimitado
3Receivers
-
3V
SSOP
-
-
70°C
-
No SVHC (21-Jan-2025)
Documentos técnicos (3)
Legislación y medioambiente
País donde se realizó la mayor parte del proceso de producciónPaís de origen:Philippines
País donde se realizó la mayor parte del proceso de producción
RoHS
RoHS
Certificado de conformidad del producto