¿Necesita más?
Cantidad | Precio (sin IVA) |
---|---|
1+ | 9,250 € |
Información del producto
Resumen del producto
SEN0217 is a Gravity water flow sensor (1/2") for Arduino measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor will rotate and the rate of rotation will vary with the rate of flow. The hall effect sensor will then output a pulse width signal. Connect it to an Arduino microcontroller and you can monitor multiple devices such as your coffee maker, sprinkler or anything else, and control the water flow rate to suit your needs.
- 11mm inner diameter, 20mm outside diameter
- Proof water pressure is <lt/>1.75 MPa
- Water flow range of 1-30L/min, voltage range from 3.5 to 12V
- Operating current of 15mA (DC 5V)
- Insulation resistance of <gt/>100Mohm, accuracy is ±5% (2 to 30L/min)
- Output pulse duty ratio of 50% ±10%
- Working humidity range from 25% to 95% RH (no frost)
- Dimension is 62mm x 36mm x 35mm, weight is 52g
Especificaciones técnicas
-
-
-
Sensor de flujo de agua
Gravity Series
Sensor de Flujo de Agua de 0,5"
-
-
Placas DFRduino UNO R3
No SVHC (21-Jan-2025)
Documentos técnicos (2)
Legislación y medioambiente
País donde se realizó la mayor parte del proceso de producciónPaís de origen:China
País donde se realizó la mayor parte del proceso de producción
RoHS
RoHS
Certificado de conformidad del producto