ASSR-1611-301E

The ASSR-1611 series from Avago Technologies are photoMOS solid state relays in miniature DIP-6pin package. These relays consist of an AlGaAs infra red light-emitting diode (LED) input stage is optically coupled to a high voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 5mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. The ASSR-1611 is specifically designed for high current applications. Typical applications include factory automation, data acquisition, industrial controls, measuring instrument and EMR / reed relay replacement.

• Compact solid state bidirectional signal switch
• SPST-NO contact configuration
• Output withstand voltage is 60V
• 2.5A or 5A current rating
• CMOS compatibility low input current
• Low on-resistance of 20mohm typical for DC and 65mohm typical for AC/DC
• 3.2ms (Ton) and 0.1ms (Toff ) typical switching speed
• High transient immunity is greater than 1kV/μs
• High input to output insulation voltage
• UL, CSA approved

Advertencias

It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage or degradation which may be induced by ESD.