TLE6251DSXUMA1

The TLE6251DS is a high speed CAN-Transceiver with bus wake-up. It works as an interface between the CAN protocol controller and the physical bus lines compatible to ISO/DIS 11898. As a successor to the first generation of HS CAN (TLE6250), it is designed to provide an excellent passive behaviour when the transceiver is switched off and a remote wake-up capability via CAN bus in low power mode. This supports networks with partially un-powered nodes. It has two operation modes, the normal and the standby mode. These modes can be chosen by the STB pin. If the TLE6251DS is in standby mode and a message on the bus is detected, it changes the level at the RxD pin corresponding to the bus signal. It is also designed to withstand the severe conditions of automotive applications and to support 12 and 24V applications. The IC is based on the Smart Power Technology SPT® which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit.

• Low power mode with remote wake-up via CAN bus
• Wake signalling by RxD change
• No BUS load in standby mode
• Wide common mode range for electromagnetic immunity (EMI)
• CAN short-circuit proof to ground, battery and VCC
• Split termination to stabilize the recessive level
• TxD time-out function
• Over-temperature protection
• Protected against automotive transients
• Green product
• AEC Qualified

Applications

Automotive, Power Management

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.