STM32F302RCT6

STM32F302RCT6 is a STM32F3 series, mainstream mixed signals microcontroller (MCU) from the STM32F302 family. It incorporates the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories and an extensive range of enhanced I/Os and peripherals connected to dual APB buses. The device offers up to 2, fast, 16-ch, 12-bit ADCs, 17 capacitive sensing channels, 4 comparators, 2 op-amp, 1-ch 12bit DAC, low-power RTC, up to 5 general-purpose 16-bit timers, 1 general-purpose 32-bit timer, one timer dedicated to motor control. It also features standard and advanced communication interfaces: up to 2 I2Cs, up to 3 SPIs (2 I2Ss), 3 USARTs, up to 2 UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.

• ARM Cortex-M4 CPU with FPU, single-cycle multiplication and HW division, DSP instruction and MPU
• 256Kbytes of flash memory and 40Kbytes SRAM on data bus
• 2 to 3.6V VDD, VDDA voltage range
• 4 to 32MHz crystal oscillator, 32kHz oscillator for RTC w/ calibration, internal 40kHz oscillator
• Interconnect matrix, reset and supply management (POR/PDR, PVD)
• Calendar RTC with alarm, periodic wakeup from stop/standby
• Serial wire debug (SWD), JTAG
• 96-bit unique ID
• 64 pin LQFP package
• Industrial temperature range from -40 to 85°C

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.