Low

NXP  LPC1765FET100,551  Microcontrolador 32 Bits, ARM Cortex-M3, 100 MHz, 256 KB, 64 KB, 100 Pines, TFBGA

NXP LPC1765FET100,551
Technical Data Sheet (1.17MB) EN Technical Data Sheet (1.26MB) EN Vea todos los documentos técnicos

La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.

Resumen del producto

The LPC1765FET100,551 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 100MHz. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The device incorporates 256kB internal flash, 64kB internal RAM, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 8-channel 12-bit A/D converter, 10-bit D/A converter, motor control PWM, quadrature encoder interface, four general purpose timers, 6-output general purpose PWM, ultra-low power real-time clock (RTC) with separate battery supply and 70 general-purpose I/O pins.
  • ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
  • In-system programming (ISP) and In-application programming (IAP)
  • Multilayer AHB matrix interconnect
  • Split APB bus
  • Standard JTAG debug interface for compatibility
  • Emulation trace module enables non-intrusive, high-speed real-time tracing of instruction execution
  • Integrated PMU (power management unit)
  • Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
  • Four external interrupt inputs configurable as edge/level sensitive
  • Non-maskable Interrupt (NMI) input
  • The wake-up interrupt controller (WIC)
  • Brownout detect with separate threshold for interrupt and forced reset
  • Power-on reset (POR)
  • Crystal oscillator with an operating range of 1MHz to 25MHz
  • 4MHz Internal RC oscillator trimmed to 1 % accuracy
  • PLL allows CPU operation up to the maximum CPU rate
  • USB PLL for added flexibility
  • Code read protection (CRP) with different security levels
  • Unique device serial number for identification purposes

Información del producto

Arquitectura:
ARM Cortex-M3
Velocidad de CPU:
100MHz
Memoria Programable, Tamaño:
256KB
Tamaño de Memoria RAM:
64KB
Núm. de Contactos Macho:
100Pines
Modelo de MCU:
TFBGA
Núm. de Entradas/Salidas:
70Entradas/Salidas
Tipo de Interfaz Integrada:
CAN, I2C, SPI, SSP, USB, UART
Tensión de Alimentación Mín.:
2.4V
Tensión de Alimentación Máx.:
3.6V
Encapsulado:
Individual
Rango de Producto:
LPC1700 ARM Cortex-M3 Microcontrollers
Estándar de Certificación para Automoción:
-
Sustancia Extremadamente Preocupante (SVHC):
No SVHC (17-Dec-2015)
Nivel de Sensibilidad a la Humedad (MSL):
MSL 3 - 168 horas

Encontrar productos similares  agrupados por atributos en común

Aplicaciones

  • Calibración;
  • Iluminación;
  • Comunicaciones y Red;
  • Industrial;
  • Seguridad;
  • Logistics;
  • Control de Motor

Legislación y medioambiente

País de origen:
Taiwan

País donde se realizó la mayor parte del proceso de producción

Conforme a RoHS:
N.º de tarifa
85423190
Peso (kg):
.001736